Effect of wave shaper on reactive materials jet formation and its penetration performance

Wave shaper effect on formation behavior and penetration performance of reactive liner shaped charge (RLSC) are investigated by experiments and simulations. The reactive materials liner with a density of 2.3 g/cm³ is fabricated by cold pressing at a pressure of 300 MPa and sintering at a temperature of 380 °C. Experiments of the RLSC with and without wave shaper against steel plates are carried out at standoffs of 0.5, 1.0, and 1.5 CD (charge diameter), respectively. The experimental results show that the penetration depths and structural damage effects of steel plates decrease with increasing the standoff, while the penetration depths and the damage effects of RLSC without wave shaper are much greater than that with wave shaper at the same standoff. To understand the unusual experimental results, numerical simulations based on AUTODYN-2D code are conducted to discuss the wave shaper effect, including the propagation behavior of detonation wave, the velocity and temperature distribution of reactive jet, and penetration depth of reactive jet. The simulations indicate that, compared with RLSC without wave shaper, there is a higher temperature produced inside reactive jet with wave shaper. This unusual temperature rise effects are likely to be an important mechanism to cause the initiation delay time of reactive jet to decline, which results in significantly decreasing its penetration performance.     

顶置武器站性能评估方法

在评估指标体系和虚拟样机仿真测试评估数据的基础上,对顶置武器站性能评估进行研究。对评估方法进行研究,提出了适合顶置武器站性能评估特点的灰色模糊综合评估法,选用灰色关联度分析计算指标权重,建立开放性的隶属矩阵,最终建立顶置武器站性能评估模型。通过实例评估表明该评估模型准确可靠。     

Estimating failure time distribution and its parameters based on intermediate data from a Wiener degradation model

Instead of measuring a Wiener degradation or performance process at predetermined time points to track degradation or performance of a product for estimating its lifetime, we propose to obtain the first‐passage times of the process over certain nonfailure thresholds. Based on only these intermediate data, we obtain the uniformly minimum variance unbiased estimator and uniformly most accurate confidence interval for the mean lifetime. For estimating the lifetime distribution function, we propose a modified maximum likelihood estimator and a new estimator and prove that, by increasing the sample size of the intermediate data, these estimators and the above‐mentioned estimator of the mean lifetime can achieve the same levels of accuracy as the estimators assuming one has failure times. Thus, our method of using only intermediate data is useful for highly reliable products when their failure times are difficult to obtain. Furthermore, we show that the proposed new estimator of the lifetime distribution function is more accurate than the standard and modified maximum likelihood estimators. We also obtain approximate confidence intervals for the lifetime distribution function and its percentiles. Finally, we use light‐emitting diodes as an example to illustrate our method and demonstrate how to validate the Wiener assumption during the testing. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

SP2100气相色谱仪数据采集卡设计

分析了“便携式火药分析试验综合信息平台”的关键组件——SP2100气相色谱仪数据采集卡的工作原理，对采集卡硬件、软件进行了设计。在采集卡软件设计中，重点对固件程序设计及驱动程序设计进行论述。试验证明：SP2100气相色谱仪数据采集卡提高了试验系统自动化程度和试验效率，缩短了试验周期。     

硅整流无刷发电机供电系统动态性能的研究

分析了坦克的供电系统中采用硅整流无刷发电机时的工作特点,建立了这种系统的数学模型,举例说明了计算方法,并在文章的最后进行了评价.     

装甲车辆起动电动机综合试验台

采用较先进的磁粉制动器作为电机的负载,使电机加载平稳、可靠、恒定,并可连续调节负载大小;同时采用高精度的ZJ型转矩转速传感器并配合转矩转速仪,不但能测量电机稳态时的转矩、转速和功率,同时还可测试电机某一过渡过程中转矩、电流、转速随时间变化的数值并贮存或打印.     

窄带假设对GNSS天线阵抗干扰性能评估的影响分析

传统方法基于窄带假设条件下的模型对天线阵抗干扰性能进行评估,存在分析精度低的问题.新一代全球卫星导航信号带宽的增加使得宽带效应更为明显,影响将更为严重.因此,窄带假设所造成的影响需要重新审视.论文结合当前普遍采用的数字域加权处理方式,推导出天线阵处理频率响应的精确模型,得出阵列处理响应在频域上可表示为空域导向矢量与时间...     

工质变比热和传热损失对Diesel循环性能的影响

用有限时间热力学的方法分析空气标准Diesel循环,由数值计算给出了存在传热损失和工质变比热时循环功与压缩比、效率与压缩比以及功和效率的特性关系,并分析了传热损失和工质变比热对循环性能的影响特点,通过分析可知传热和变比热特性对Diesel循环性能有较大影响,所以在实际循环分析中应该予以考虑.     

装甲车辆动力传动系统整体性工程初探

全面考虑装甲车辆动力传动系统论证、研制、生产及使用等方面的因素,从整体、系统和全局的观点出发,论述了装甲车辆动力传动系统的整体式设计、一体化控制、性能综合评价和寿命周期费用分析.从而把装甲车辆动力传动系统的论证、研制、生产及使用看作一个整体性工程来考虑,克服了以往设计和使用中重点突出某一过程或部件,而忽略相互匹配和顾此失彼的问题,为在现有技术基础上进一步提高装甲车辆的机动性能,提供了一种新的研究思路.     

军队院校科研工作绩效评估探讨

阐述了军队院校科研工作绩效评估的目的、作用和内容等,讨论了军队院校科研工作绩效评估的基本方法,对开展军队院校科研工作绩效评估的相关问题进行了探讨.